| Customization: | Available |
|---|---|
| After-sales Service: | Oversea Installation & Training Services |
| Warranty: | 2 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Navan Machine Best Price Aluminum Can Energy Drink Filling Machine 
CARBONATED DRINK
The machine is suitable for filling and sealing of carbonated drink beer and beverage in the industrial of pop can beverage field. The filling and seaming are of integral design. The principle of equal pressure filing is adopted. During filing, after the empty can reaches into the can lifting cylinder after passing through the pneumatic triplex parts, and the empty can is raised and the conical seal gasket under the filling valve is sealed. The position turning block of the filling valve turns the position and opens the valve under the action of another cylinder. The air is filled into the empty can to form equal pressure. From a large material barrel, the beer passes through 14 small conduits and flows into the empty can. When the liquid level in the empty can blocks the gas return pipe mouth, then the filling stops. Under the action of arm, the de-foaming valve will slowly discharge the air and pressure, the can supporting cylinder will continue to fall. After it is discharged, the can is sent to the sealing machine for sealing by the hook chain that runs synchronously. During the sealing, the sealing wheel carries out pre-sealing and then real sealing. After it is sealed, the can is pushed out by the beating head of the cap beating mechanism and then dialed by dial to the conveyor belt for conveying.
NON-CARBONATED DRINK
It uses atmospheric pressure to fill the original raw material. After the can is set up, the filling sink and the air are centered, the empty can is lifted and sealed, and the mouth of the filling tiger is automatically opened at the same time, and the filling is stopped when the filling liquid level blocks the air return pipe of the valve. The can is sent to the nozzle head by the fishing head, and the vine is sent to the filling mouth by the centimeter and the pressure head. When the can support mechanism is raised, the pressure head presses the can mouth sealing wheel first pre-Jli sealing and then solid sealing After Xizi was sealed, he was pushed out by the head of the styling mechanism, and then went into the out-tank transport.
| CAN Filling Seaming Machine Technical Parameters: | |
| Number of filling valves | 8,12, 18, 20, 24, 32 |
| Filling speed: | 1,000-18,000CANS/HOUR (500ml) |
| Type of CAN | 250ML 330ML 355ML 500ML 750ML Pop-CAN , Tin-CAN |
| Bottle height | 80-175(mm) |
| Bottle diameter | Φ53-66(mm) |
| Filling temperature | Ambient temperature / Cold Filling |
| Filling principle | BACK pressure filling / gravity filling machine |
| Filling product | Fruit juice , flavor juice , fruit juice with pulp ,Mineral water, purified water, drinking water, flavor water , soda water , alkaline water , spring water and low alcoholic drinks. |
|
Item |
Unit |
Model |
|||
| NF4T100Q | NF4T150Q | NF4T200Q | NF6T300Q | ||
|
Capacity |
Cans/min |
≤100 |
≤150 |
≤200 |
≤300 |
|
CAN Diameter |
Mm |
Φ53~66 |
Φ53~66 |
Φ53~66 |
Φ53~66 |
|
CAN Height |
Mm |
80~175 |
80~175 |
80~175 |
80~175 |
|
Filling unit |
Unit |
12 |
20 |
24 |
32 |
|
Sealing unit |
Unit |
4 |
4 |
4 |
6 |
|
Filling pressure |
MPa |
0.2-0.4Mpa |
0.2-0.4Mpa |
0.2-0.4Mpa |
0.2-0.4Mpa |
|
Compressed air |
Nm3/h |
3 |
4 |
4 |
5 |
|
CO2 pressure |
MPa |
0.5 |
0.5 |
0.5 |
0.5 |
|
CO2consumption |
Nm3/h |
3.5 |
5.5 |
6.5 |
9 |
|
Filing temp. |
ºC |
0-4ºC |
0-4ºC |
0-4ºC |
0-4ºC |
|
Power |
Kw |
7.5 |
7.5+0.37 |
7.5+0.55 |
7.5+0.75 |
|
Weight |
T |
3.5 |
4.5 |
4.5 |
7.5 |
|
Dimension |
Mm |
2800×1500×2000 |
3100×1850×2000 |
3250×2050×2000 |
3800×2300×2000 |
About Us
Navan Industrial has invested its best resources in technical research, to design and realize innovative in bottle blowing, filling, capping , labeling and packing systems which enable to respond and reach different demands and achieve new goals everyday, seizing the market's expectations in the pass years .
At the same time , we also provides turn-key services for customers, from plant layout, equipment manufacturing, production line setup, to operators training. We are always trying our best to meet the demands of our customers continuously and seeking for mutual development.
Today Navan has enhanced its exsitence both in domestic and global market. Thanks to its various and perfect cases, we provide our customers with delicated and customized solutions at quick response. Navan machines are utilized in large and small companies all around the world since 1990s.
Massive experience gained through the years of water, juice , soft drink , beer, honeys, sauces etc., with all the abundant experience we are able to deal with any problems related to specific customers requirements, such as daily or special products., and perfect the creation of various machine to satisfy any customer's demands.
Navan Service
The sample service
1.We can send you the video of the running machine for your reference .
2.You are always welcome to come to visit our factory, and watch the operation of the machines here . We will make the arrangement to pick you up when you reach airport or railway station .
3.If we get the permission of the customer who has brought the machines from us ,we will arrange your visiting to their factory.
Customized service
1.we can design the machines according your requirements(material ,power,filling type,the kinds of the bottles, and so on).
2.At the same time we will give you our professional suggestion on factory design , bottle design , label design .... etc
After-sales service
1.We will provide the B/L and concerning Invoice , Packing List , Certificate .... on time to make sure you can get the machine quickly
2.When you finish the Preparation conditions , we will send our engineer to your factory for the installation, testing and also training .
3.We provide one year warranty with spare parts free since machine installation done .
NAVAN supply and manufacture the followings machines
1) Water treatment equipment--- Electrolytic water equipment, RO purified equipment, UF purified equipment, Sand filter, Carbon filter, Water softner, Sea Water treatment.
2) Filling Machine --- 2 in 1 Filling Capping Machine / 3 in 1 Washing filling capping machine / 4 in 1 Washing filling capping machine / 5 in 1 Washing filling capping machine ---for your water, beer , kombucha , Kvass , cabonated drink,juice,wine,vinegar, milk,tea and so on.
--- 100 to 2500ml bottle, 3-10L,11- 20L bottle (3-6gallon bottle)
--- PET bottle, Glass bottle, PP bottle and Can
--- Pressure Cap , Screw cap, Aluminum cap, Grown Cap , T-cork , Wooden Cork and three (four) twist caps etc.
3) Labeling Machine --- Stick label, Shrink sleeve label, Hot melt Opp labels. Wet gule label
4) Printer --- Manual code printer , Inkjet printer , Laser printer
5) Packing Machine ---- Shrink wrapper , Carton Packer , Palletizer , Conveyor system , Robot Packing System
6) Bottle Blowing Machine --- Linear and Rotary Blowing Machine for making plastic bottle
7)Injection Molding Machine --- for your cap and proform.
8) Subsidiary products for drink production --- Bottle Washer, Bottle Capper, Conveyor, Bottle Dryer, Bottle Warmer, Bottle Loading system, Bottle unscrambler, CIP system, Bottle Cooler, Bottle Sterilizer, Blending tank, Storage Tank, Sugar Melting Pot, Syrup Filter Conveyor and so on.
NAVAN will supply you bottle design, label design, workshop design free and make Turnkey Project for you.
Don't hesitate to contact us if you show interesting on our beverage production machine and our NAVAN company.
Q 1 When can I get installation from you? how much the cost?
When you finish the preparation conditions(water resource,electricity,air supply,production materials) according to our designed layout , please contact with our sales manager, we will dispatch engineer to you.
* Inspect and improve connection jobs together with your team .
* Guide your staff to operate machines , and explain how to operate and maintain machines .
* Collected your your comments on our machines , we will send feedback to our technical team to improve our machines continuously. The customer should be responsible for the room, meals and board and the two-way air tickets and visa and fee as well the allowance 100 USD per day for each person. And should be also responsible for the engineer's personal safety. Note: Normally when your preparation is done,you can contact with our sales people and cooperate us to get the visa for the engineer and our engineer will be there within 15 days more or less .
Q 2 How long time for installation?
According your machines order,we will send one or two engineers to your plant,it will take about 15 days to 30 days.
Q 3 When can I get my machine after I paid?
Normally production time is around 30-60days , it depends on your ordered machines and quantity . The shipping time is based on your destination port.(Usually we use Shanghai port , Ningbo Port as loading port )
Q 4 How about the spare parts?
We will send one year enough easy broken spare parts together with the machines together when delivery. During the warranty time, we will supply the spare parts with our cost price including and delivery fees.
Q 5 What`s your payment term?
We accept TT , TT/LC/Western union.etc
Q 6 How to test machine before delivery?
We will connect all machines in line make them running over 8 hours non-stop , then take and send testing videos. Or we could live video inspection .
Q 7 How about the Packaging details?
Standard export packing to ensure that the product packaging integrity and safety. ( Heavy products adopt export plywood case packing with waterproof film . Small products use thick carton packing waterproof film)
Q 8 Do you have reference project?
We have reference project in most countries. After getting the permission of the customer who has brought the machines from us ,we will send you their contact information and arrange your visiting to their factory. And you are always welcome to come to visit our factories ,and inspect the machine running in our factory .We will be glad offer necessary supports on hotel booking , transportation , VISA application. OR you can get video of our reference running machine on our website too .
Q 9 Do you provide turnkey project?
YES Turnkey project is available .We can help you to start a new beverage / water factory from A to Z.
Q 10 Do you have agent and after-service stations?
So far we have agent in Kampala ,Uganda and Dubai ,UAE .You are mostly welcomed to join us!
Q 11 Do you have any certificate?
We have been certificated by the famous certification authority such as CE , ISO, SGS ...etc
Q 12 Do you provide customized service?
We are able to develop the machines according your requirements(material ,power,filling type,the kinds of the bottles,and so on),at the same time we will offer you professional advice based on our 30+ years beverage machine industrial experience.
Q 13 What`s your guarantee or the warranty of the quality if we buy your machines?
We offer you high quality machines with 1 year guarantee and supply life-long technical support for free
We Warmly Welcome Customers All Over The World To Our Company. ANY DEMANDS OR REQUEST ,Please Contract With Us FREELY!
ZHANGJIAGANG NAVAN INDUSTRIAL CO.,LTD
){kind=link}